Quartering Wheel Cups for O Gauge Lionel Steam Engines – Size 3

Quartering Wheel Cups for O Gauge Lionel Steam Engines – Size 3

1.39″

Max Outer Dia

Actual size should be a little smaller this.

0.20″

Offset

Center line of axel & Sidebar screw.

0.28″

Indexing Hole Size

Size of the bolt head. Needs to be a little smaller to fit in indexing hole. In most case the screw that holds the
side bars to the drive wheels can be used. For the other that is where the Indexing Screws come into play.

• Cups Design & Tested to work on Lionel O gauge Steam Turbine Engines 224, 646, 675, 2025, 2035, 2046, 2055, 2056, 2065. But may work on others. Check sizing info.
• This tool was designed to Align the wheels on steam engines so that the wheels have 87 degrees offset.
• Can be used in a standard Arbor Press.
• The tool is machined out of solid aluminum
• With Indexing screws, cups will work on both wheels with & with out post. Cup are thick enough for either.
• Some engines require only 2 cups, a 0 & 87 cup. Others require 4 (2 for the outer wheels, 2 for the center wheels. Wheels will be marked with
  – Outer – 0 & 87
  – Center – C0 & C87