Rivet / Arbor Press

Rivet / Arbor Press This Rivet / Arbor press is a modified 1 ton Arbor Press. With the modification & the included additional hardware you can use the old style Lionel Riveting & Quartering cups. The newer reproduction tools will work as well. With set screws in both the ram & lower plate to lock quartering cups & other tools in place.

• Speed wheel with the ability to use without. Swap wheel with the Wheel Collar for more clearance.
• Reversible Ram With Holes on both ends- 3/8″ hole with set screw at one end of ram- 1/2″ hole with set screw at the other end of ram
• At least 3-1/2″ between either the quartering cups or rivet press tools at fully open.
• 4″ working depth from center of tools.
• Adjustable Depth Stop With Fine Adjustment
• Rivet Press & Quartering cups NOT included.

Included

•  Modified Palmgren 1 ton Arbor Press- Lower plate with 5/8″ hole with set screw
• 3/8″ cup for Lower Plate.
• 1/2″ cup for Lower Plate
• 3/8″ Alignment Pin
• Wheel Collar
• Required:3/32″, 1/8″, & 5/32″ SAE Allen wrenches

Shipping

• Shipping weights 36lbs.
• With the heavy shipping weight & with the changing shipping cost a $50 shipping charge will be charged.
• A refund will be issue for the difference in the real shipping cost.