, ,

Gear Centering Press Tool

$33.00

  • This tool is designed to center the gear on the axle of the Lionel 726, 736 and the Turbines such as the 671 and 2020. May work on other but tested on engines listed
  • These engines have a worm drive and that gear needs to be centered to work properly.
SKU: PT-GC-1 Categories: , ,

Gear Centering Press Tool:

  • This tool is designed to center the gear on the axle of the Lionel 726, 736 and the Turbines such as the 671 and 2020. May work on other but tested on engines listed
  • These engines have a worm drive and that gear needs to be centered to work properly.
  • This tool will center the axle on the gear in two presses.
  • Tool has pockets on both ends to prevent damaging the bushing.
  • Tool bottoms out on the case, not against bushings
  • Recommend flipping engine & us the end with pre-set depth on both sides
  • One side has a pre-set depth hole to press the axle on.
  • The other side is hollow and will support the bushing as you press the axle on & off the gear.
  • Can be used in a Standard Arbor Press, Vice or with a hammer.
  • Machined from solid Steel
  • Gears & Bushings must be in good shape or centering the gear will not work correctly.
  • Fits our Rivet / Arbor Press. Will need to use the ½” hole in ram
  • & ½” adapter for lower plate
Weight 3 oz
Dimensions 9 × 7 × 0.75 in

Reviews

There are no reviews yet.

Be the first to review “Gear Centering Press Tool”

Your email address will not be published. Required fields are marked *