Are show piece O & S Gauge Display / Test station running.

Display / Test Station

image8

  

These kits gently lift the engines so the drive wheels run without touching the tracks. Can be use on work bench as test/service station or as a running stationary display up above the fireplace on the mantle.

  

- Use after servicing your Engine to test operation.

- Blow off extra oil after oiling so it does not end up on your layout.

- Smoke, Whistle & Rail sounds will work

- Dual motor Diesels or Diesels where the power pick-up and drive wheels are the same wheels will work but may require a jumper to the chassis ground.

O Gauge

- O-Gauge tubular style Lionel or K-Line track only. 

- Lifts machined from solid Aluminum.

- The kit version you will need at least 2 sections of track tubular style O-Gauge with the center ties removed. This is so the lifts can slide in & out for adjustment. 2 Sections of track is enough for most engines. Add additional sections of track for cars, about 1 section per car.

- Works for many Steam & Diesel O-gauge Engines but NOT all. Unfortunately we only have so many Engines we can test with. Our collection is mostly Pre & Post war Lionel Trains & and have been tested to work on all of them.

- Will NOT work on fast or O27 track.

- Articulating Steam Engines where the drive wheel float separately from the chassis such as a BIGBOY will NOT work, Unlessyou buy the Add-on kit for Articulating Steam Engines. These type of engines require an addition lift in the center of the engines 


S Gauge

- S-Gauge American Flyer or K-Line track only. 

- Lifts machined from solid Aluminum & Plastic.

- The kit version you will need at least 2 sections of S-Gauge American Flyer track with the center ties removed. This is so the lifts can slide in & out for adjustment. 2 Sections of track is enough for most engines. Add additional sections of track for cars, about 1 section per car.

- Will NOT work on fasttrack.

- Works for many Steam & some Diesel S-gauge Engines but NOT all. Unfortunately we only have so many Engines we can test with. Our collection is mostly Pre & Post war Lionel Trains but we do have a few American Flyers & have been tested to work on all of them.

- Steam or Diesels where the power pick-up and drive wheels are the same wheels will not work. Works on Steam Engines with the power pick-up on tender.

 -  Articulating Steam Engines  where the drive wheel float separately from the chassis such as a BIGBOY will not work. 

 A 646 steam engine running on are O-Gauge Display / Test Station.  

Little switcher with RailSound running on are O-Gauge Display / Test Station.

image9

O Gauge kit

You add the track & a nice piece of wood & you can make your own Display or Test station. For use on O-Gauge (old style) track. Typical setup requires 2 pieces of track with center tie removed on both for the Engine & 1 piece of track per car on display. 


Kit includes:

1 - Front Lift

1 - Rear Lift

1 - Diesel Lift Block

2 - Terminal Pins

image10

S Gauge Kit

You add the track & a nice piece of wood & you can make your own Display or Test station. For use on S-Gauge American Flyer track. Typical setup requires 2 pieces of track with center tie removed on both for the Engine & 1 piece of track per car on display. 

Kit includedes:

1 - Front Lift

1 - Rear Lift

2 - Terminal Pins

image11

Pre-mounted & Custom built displays

Ask about the Pre-mounted units in both O & S Gauges in 3 & 4 track section lengths. 

  

Ask about custom lengths, Woods, Finishes, & Arrangements such as my 4 level are show piece with Mixed Gauges, Fuse holders, Switches & Connectors. 

  

Lionel Lionmaster Challenger 3983 on are O-Gauge Display / Test Station with the A.S.E. add-on.  

 

K Line Bigboy 4015 on are O-Gauge Display / Test Station with the A.S.E. add-on.  

image12

O Gauge A.S.E add-on

The add-on for Articulating Steam Engines (A.S.E.) will let you run your Bigboys & Challenger engines on our stands. These types of engines require an addition center lift & a rear Cab  lift. 


Kit includes:

1 - Center Lift

1 - Rear Cross Plate

image13

O Gauge Comb Kit w/ the A.S.E. add-on

 

You add the track & a nice piece of wood & you can make your own Display or Test station. For use on O-Gauge (old style) track. Typical setup requires  2 or 3 pieces of track with center tie removed on both for the Engine & 1 piece of track per car on display.
Kit includes:
1 - Front Lift

1 - Center Lift
1 - Rear Lift 

1 - Rear Cross Plate
1 - Diesel Lift Block
2 - Terminal Pins

Like what you see? Tools are available on thur Ebay now. Click link below.

Ebay link